>> 论　　文
>> 专　　利
>> 专　　著
>> 获奖成果
>> 成果推广
>> 成果简介

 

 

  

发表论文(2000年--2006年)

共 16 页 此为第1页

2006年度      下一页

2006年度，实验室发表的论文中有53篇被SCI收录，有24篇被EI收录（不含同时被SCI收录的论文）。其中，影响因子超过2的论文有6篇。

  1. L.N. Hu, X.F. Bian, X.B. Qin, Y.Z. Yue, C.D Wang, Thermodynamic basis for cluster kinetics: prediction of the fragility of marginal metallic glass-forming liquid, J. Phys. Chem. B, 110(2006)21950(4.033)
  2. Y.J. Bai, C.G. Wang, N. Lun, M.J. Yu, B. Zhu, HRTEM microstructures of PAN precursor fibers, Carbon, 44(2006)1773 (3.419)
  3. T.K. Gu, X.F. Bian, J.Y. Qin, C.Y. Xu, Ab initio molecular-dynamics simulations of liquid GaSb and InSb, Physical review B, 71 (2006)104206 (3.185)
  4. T.K. Gu, J.Y. Qin, X.F. Bian, C.Y. Xu, Structure change of liquid GaSb under pressure: An ab initio molecular-dynamics simulation, The journal of chemical physics, 125 (2006)94506? (3.138)
  5. J. Guo, X.F. Bian, Q.G. Meng, Y. Zhao, S.H. Wang, C.D. Wang, T.B. Li, Glass-forming ability and fragility of RE55Al25Co20(RE=Ce, Pr, Nd, Sm, Gd) alloys, Scripta materialia, 55 (2006)1027 (2.228)
  6. Y.J. Bai, C.G. Wang, Y.X. Qi, B. Zhu, Y.X. Wang, Y.X. Liu, G.L. Geng, Rapid synthesis of Si3N4 dendritic crystals, Scripta materialia, 54(2006)447 (2.228)
  7. L. Wang, C.X. Peng, Y.Q. Wang, Y.N. Zhang, Vitrification and crystallization of metallic liquid under pressures, Journal of physics-condensed matter, 18(2006)7559(2.145)

 

SCI收录论文目录

  1. X.F. Bian, L.N. Hu, C.D Wang, Degree of local structural ordering and its correlation with the glass forming ability of alloys, Journal of Non-crystalline solids, 352(2006)4149
  2. X.F. Bian, B.A. Sun, L.N. Hu, Medium-Range order structure and fragility of superheated melts of amorphous CuHf alloys, Chinese physics letters, 23(2006)1864
  3. L.N. Hu, X.F. Bian, X.B. Qin, Y.Z. Yue, C.D Wang, Thermodynamic basis for cluster kinetics: prediction of the fragility of marginal metallic glass-forming liquid, J. Phys. Chem. B, 110(2006)21950
  4. Y. Zhao, X.F. Bian, X.B. Qin, J.Y. Qin, X.X. Hou, X-ray diffraction experiments on In30Sn70 from normal liquid to solidus, Physics letters A, 356( 2006)385
  5. Y. Zhao, X.F. Bian, X.B. Qin, J.Y. Qin, X.X. Hou, X-ray diffraction experiments on the solidification process of Cu80Ag20 alloy, Physics letters A, 357 (2006)479
  6. Y. Zhao, X.F. Bian, X.X. Hou, Viscosity and fragility of the supercooled and superheated liquids of the Ni60Zr30Al10 metallic glass-forming alloy, Physica A, 367 (2006)42
  7. Y.Q. Wang, Y.Q. Wu, J.T. Liu, X.F. Bian, Discontinuous structural phase transition behaviour in multiple component alloy melts, Chinese physics letters, 23 (2006)2513
  8. S.R. Wang, H.R. Geng, Y.Z. Wang, B. Sun, The abrasive wear properties of Al-Mg-Si3Ni4 metal matrix composites, Journal of materials engineering and performance, 15 (2006)549
  9. S. R. Wang, H.R. Geng, Y.Z. Wang, Si3Ni4/Mg composites with an interpenetrating network, Journal of materials science, 41 (2006)5751
  10. T.K. Gu, J.Y. Qin, X.F. Bian, C.Y. Xu, Structure change of liquid GaSb under pressure: An ab initio molecular-dynamics simulation, The journal of chemical physics, 125 (2006)94506
  11. J. Guo, X.F. Bian, Q.G. Meng, Y. Zhao, S.H. Wang, C.D. Wang, T.B. Li, Glass-forming ability and fragility of RE55Al25Co20(RE=Ce, Pr, Nd, Sm, Gd) alloys, Scripta materialia, 55 (2006)1027
  12. X.H. Wang, M. Zhang, Z.D. Zou, S.Y. Qu, Microstructure and wear properties of TiC-VC reinforced iron based hardfacing layers, Materials science and technology, 22(2006)193
  13. T. Lin, X.F. Bian, J. Jiang, Relation between calculated Lennard-Jones potential and thermal stability of Cu-based bulk metallic glasses, Physics letters A, 353 (2006)497
  14. T. Lin, X.F. Bian, J. Jiang, Y. Dong, Effect of Ni on glass-forming ability of Cu-Ti-based amorphous alloys, Transactions of Nonferrous metals society of China, 16 (2006)604
  15. N. Han, X.F. Bian, Z.K. Li, T. Mao, C.D. Wang, Effect of Si on the microstructure and mechanical properties of the Al-4.5%Cu alloys, Acta Metall. Sin. (English letters), 19 (2006)405
  16. K.B. Yin, X.F. Bian, N. Han, X.J. Yao, Y. Zhao, J.K. Zhou, Effect of the addition of Al-Ti-C master alloy on the microstructure and microhardness of a cast Al-10Mg alloy, Journal of University of Science and Technology Beijing, 13 (2006)149
  17. L. Wang, Y.Q. Wang, C.X. Peng, Y.N. Zhang, Medium-range structural order in liquid Ni20Al80 alloy: Experimental and molecular dynamics studies, Physics letters A, 350(2006)405
  18. L. Wang, Y.Q. Wang, C.X. Peng, Y.N. Zhang, Relating nucleation to dynamical and structural heterogeneity in supercooled liquid metal, Physics letters A, 350(2006)69
  19. L. Wang, H.R. Cong, Y.N. Zhang, X.F. Bian, Medium-range order of liquid metal in the quenched state, Physica B, 355(2006)140
  20. L. Wang, C.X. Peng, Y.Q. Wang, Y.N. Zhang, Vitrification and crystallization of metallic liquid under pressures, Journal of physics-condensed matter, 18(2006)7559
  21. W.M. Wang, P. Jia, S.H. Wang, Y.C. Niu, X.F. Bian, Structure characterization of amorphous Al83Ni10Ce5Si2 under the relaxed annealing, Glass physics and chemistry, 32(2006)511
  22. W.M. Wang, Y.C. Niu, S.F. Jin, Y.N. Zhang, X.F. Bian, J.M. Liu, Effect of cluster deposition on the eutectic structure in binary systems: A Monte-Carlo simulation, Journal of alloys and compounds, 407(2006)215
  23. Y.N. Zhang, L. Wang, W.M. Wang, J.K. Zhou, Structural transition of sheared-liquid metal in quenching state, Physics letters A, 355(2006)142
  24. H.S. Yu, H.M. Chen, L.M. Sun, G.H. Min, Preparation of Al-Al3Ti in situ composites by direct reaction method, Rare Metals, 25(2006)32
  25. Y.J. Bai, C.G. Wang, N. Lun, M.J. Yu, B. Zhu, HRTEM microstructures of PAN precursor fibers, Carbon, 44(2006)1773
  26. Y.J. Bai, C.G. Wang, Y.X. Qi, B. Zhu, Y.X. Wang, Y.X. Liu, G.L. Geng, Rapid synthesis of Si3N4 dendritic crystals, Scripta materialia, 54(2006)447
  27. J.J. Liu, H.Y. Ge, C.G. Wang, Modification of polyacrylonitrile precursors for carbon fiber via copolymerization of Acrylonitrile with ammonium Itaconate, Journal of applied polymer science, 102(2006)2175
  28. M.J. Yu, C.G. Wang, Y.J. Bai, Y.X. Wang, Q.F. Wang, H.Z. Liu, Combined effect of processing parameters on thermal stabilization of PAN fibers, Polymer Bulletin, 57(2006)525
  29. M. Jing, C.G. Wang, Y.J. Bai, B. Zhu, Y.X. Wang, Effect of temperatures in the rearmost stabilization zone on structure and properties of PAN-based oxidized fibers, Polymer Bulletin, 006-0692-2
  30. J. Chen, C.G. Wang, X.G. Dong, H.Z. Liu, Study on the coagulation mechanism of wet-spinning PAN fibers, Journal of polymer research, 2006,13(6):515-519
  31. J.X. Hou, H.X. Guo, C.W. Zhan, X.L. Tian, X.C. Chen, Viscous and magnetic properties of liquid Cu-25wt.%Sn alloy, Materials letters, 60(2006)2038
  32. J.X. Hou, H.X. Guo, J.J. Sun, X.L. Tian, C.W. Zhan, X.B. Qin, X.C. Chen, Structure change of Pb melt, Physics letters A, 358(2006)171
  33. D.G. Zhao, X.F. Liu, Y.C. Pan, Y.X. Liu, X.F. Bian, Microstructure and mechanical behavior of AlSiCuMgNi piston alloys reinforced with TiB2 particles, Journal of materials science, 41(2006)4227
  34. LN. Yu, X.F. Liu, Z.Q. Wang, J.W. Liu, Instability of TiC and TiAl3 compounds in Al-10Mg and Al-5Cu alloys by addition of Al-Ti-C master alloy, Journal of University of Science and Technology Beijing, 13(2006)144
  35. LN. Yu, X.F. Liu, The relationship between viscosity and refinement efficiency of pure aluminum by Al-Ti-B refiner, Journal of alloys and compounds, 425(2006)245
  36.  Y.Y. Wu, X.F. Liu, X.F. Bian, Effect of AlP on the eutectic nucleation in Ni–38 wt.%Si alloys, Materials Science and Engineering A, 427(2006)69
  37. K.N. Sun, J.Q. Bi, R. Liu, The strengthening and toughening mechanism of Fe-Al/Al2O3 composite mat K.N. Sun erials, Journal of Wuhan University of Technology, 21(2006)10
  38. C. Sun, K.N. Sun, Synthesis and characterization of LiZn ferrite-coated CNTs via a SOL-GEL method, Advanced Composite letters, 15(2006)169
  39. A.J. Li, Y.H. Zhen, Q. Yin, L.P. Ma, Y.S. Yin, Microstructure and properties of (SiC, TiB2)/B4C composites by reaction hot pressing, Ceramic International, 32(2006)849
  40. R.H. Fan, L. Qi, K.N. Sun, G.H. Min, H.Y. Gong, The bonding character and magnetic properties of Fe3Al: comparison between disordered and ordered alloy, Physics letters A, 360(2006)371
  41. R.H. Fan, H.L. Lu, K.N. Sun, W.X. Wang, X.B. Yi, Kinetics of thermite reaction in Al-Fe2O3 system, Thermochimica acta, 440(2006)129
  42. 武传松，赵朋成，熔透溶池表面下塌变形的动态演变过程分析，金属学报，42(2006)865
  43. 武传松，王怀刚，张明贤，小孔等离子弧焊接热场瞬时演变过程的数值分析，金属学报，42(2006)311
  44. M.A. Chen, C.S. Wu, Z.D. Zou, Electron bean welding of SiCp/LD2 composite, Transactions of nonferrous metals society of China, 16(2006)818
  45. J. Wang, Y.J. Li, Y.S. Yin, Microstructural characterization in diffusion bonded???????? TiC-Al2O3/ Cr18-Ni8 joint with Ti interlayer, Bulletin of Materials Science, 29(2006) 155
  46. J. Wang, Y.J. Li, H.J. Ma, Y.S. Yin, Microstructure and diffusion kinetics at the bonded Fe-16Al/Cr18-Ni8 interface, Reaction kinetics and Catalysis Letters, 87(2006) 67
  47. J. Wang, Y.J. Li, H.J. Ma, Diffusion bonding of Fe-28Al (Cr) alloy with low-carbon steel in vacuum, Vacuum, 80(2006) 426
  48. J. Wang, Y.J. Li, Y.S. Yin, Microstructure of a vacuum diffusion layer in the joint of Fe-Al alloy with low-carbon steel, Materials Science, 41 (2006) 647
  49. P. Liu, Y.J. Li, H.R. Geng, J. Wang, Investigation of interfacial structure of Mg/Al vacuum diffusion-bonded joint, Vacuum, 80 (2006) 395
  50. P. Liu, Y.J. Li, H.R. Geng, J. Wang, H.J. Ma, G.L. Guo, Microstructure and phase constituents in the interface zone of Mg/Al diffusion bonding, Metallurgical and Materials Transactions, 37B (2006)649
  51. H.J. Ma, Y.J. Li, J. Wang, Analysis of the microstructure of Cr-Ni surface layers deposited on????? Fe3Al by TIG, Materials Characterization, 57(2006):419
  52. H.J. Ma, Y.J. Li, J. Wang, Y.S. Yin, Analysis of the microstructure and phase constitution of the Fe3Al/18-8 diffusion interface after re-heating, Materials Chemistry and Physics, 100(2006)319
  53. H.J. Ma, Y.J. Li, J. Wang, Y.S. Yin, Effect of heat treatment on microstructure near diffusion bonding interface of Fe3Al/18-8 stainless steel, Materials Science and Technology, 22(2006)1

Ei收录论文目录（不含同时被SCI收录的论文）

  1. 潘福贞，杨华，焦金玲，魏代斌，K/Na-RE复合变质对辊环用高速钢组织及力学性能的影响，铸造，55(2006)164
  2. 国洪轩，侯纪新，田学雷，秦敬玉，陈熙琛，金属材料在液态和液固转变过程中磁化率变化的测量方法和装置，中国有色金属学报，16(2006)862
  3. 孙建俊，田卫星，侯纪新，郑洪亮，国宏轩，陈熙琛，田学雷，不同冷却速率下包晶合金Al3Ni凝固组织的变化，铸造，54(2006)553
  4. 胡小琳，刘相法，陈海霞，赵宝银，锶对铝硅合金中磷变质的影响，铸造，55(2006)335
  5. 丁海民，刘相法，于丽娜，乔进国，Al-5Ti-1B和Al-P中间合金对Al-Si合金的联合变质作用，铸造，55(2006)176
  6. 尹文宗，范润华，伊新兵，骆光恒，孙康宁，Al-Fe3O4体系在机械力化学过程中的物理化学变化，人工晶体学报，35(2006)907
  7. 孙康宁，赵萍，任学华，赵太荣，李爱民，朱广楠，磷酸钙骨水泥中羟基磷灰石在碳纳米管上的吸附生长，硅酸盐学报，34(2006)507
  8. 孙昌，孙康宁，李爱民，刘爱红，刘晓飞，高强、低致密度Ni3Al/HAP生物陶瓷复合材料的制备与性能研究，人工晶体学报，35(2006)743
  9. 孙昌，孙康宁，候肖瑞，冷亮，刘晓飞，胡志坤，李春胜，HAP/聚酯生物复合材料的制备与吸波特性，功能材料与器件学报，12(2006)285
  10. 刘爱红，孙康宁，李爱民，魏源，孙昌，CNTs/HAp复合材料及其动物离体组织热效应研究，功能材料，37(2006)1322
  11. 于志云，孙康宁，孙晓宁，李爱民，纳米碳管/羟基磷灰石复合材料的凝胶注模，复合材料学报，23(2006)41
  12. 刘睿，孙康宁，毕见强，残余试样对等径角挤压过程的影响，中国机械工程，17(2006)1858
  13. 侯肖瑞，孙昌，冷亮，胡志坤，孙康宁，微纳米吸波材料研究状况，现代化工，26(2006)112
  14. 毕见强，孙康宁，范润华，刘睿，2A12铝块体超细晶材料的ECAP制备，人工晶体学报，35(2006)221
  15. 毕见强，孙康宁，刘睿，王素梅，范润华，等径角挤压Al-4.25%Cu多晶材料的裂纹产生于扩展，人工晶体学报，35(2006)724
  16. 李爱菊，甄玉花，张继明，尹衍升，(SiC, TiB2)/B4C 复合材料的微观结构及性能，硅酸盐学报，34(2006)10
  17. 赵明，武传松，赵朋成，CTAW熔池形状数值模拟精度的改进，焊接学报，27(2006)17
  18. 陈茂爱，武传松，刘国栋，SiCp/LD2复合材料的激光焊焊缝组织及性能，焊接学报，27(2006)51
  19. Y.J. Li, J. Wang, H.J. Ma, T. Feng, A study of Interface microstructure and vacuum brazing of aluminium plate-wing style cooler, International Journal for the Joining of Materials, 18(2006)53
  20. 李亚江，刘鹏，王娟，尹衍升，夏春智，Mg/Al异种材料脉冲TIG焊接头的组织结构，焊接学报，27(2006)39
  21. 李亚江，王娟，尹衍升，Fe3Al与Q235钢异种材料扩散焊的界面剪切强度，材料科学与工艺，14(2006) 131
  22. 王娟，李亚江，马海军，刘鹏，Ti/Cu/Ti复合中间层扩散连接TiC-Al2O3/W18Cr4V接头组织分析，焊接学报，27(2006) 9
  23. P. Liu, Y.J. Li, J. Wang, H.R. Geng, Diffusion bonding technology and Microstructure of Mg/Al dissimilar materials, International Journal for the Joining of Materials, 18 (2006) 27
  24. 马海军，李亚江，王娟，尹衍升，再加热对Fe3Al/18-8扩散焊界面附近组织结构的影响，焊接学报，27(2006) 35

 

下一页
 
Copyright 2002-2003 ©　山东大学材料液态结构及其遗传性教育部重点实验室 All Right Reserved